Category: Construction Equipment

Posted on by — Leave a comment

Case 621D Loader Serial Number Location, Fluid Capacities

Serial Number / PIN location

Fluid Capacities

Engine Oil
Capacity with Filter Change – 15.1 litres (16 U.S. quarts)
Type of oil – Case No. 1 engine oil

Engine Cooling System
Capacity – 36 litres (38 U.S. quarts)
Type of Coolant – Ethylene glycol and water mixed for lowest ambient temperature (at least 50/50 mix)

Fuel Tank
Capacity – 189 litres (50 U.S. gallons)
Type of Fuel – No. 2 diesel fuel

Hydraulic System
Hydraulic Reservoir Refill Capacity with Filter Change – 68.5 litres (72 U.S. quarts)
Total System Capacity – 113.6 litres (30 gallons)
Type of Oil – MS-1209 Hy-Tran Ultra

Transmission
Refill Capacity with Filter Change – 19.9 litres (21 U.S. quarts)
Total System Capacity – 27.7 litres (29.25 U.S. quarts)
Type of Oil – MS-1209 Hy-Tran Ultra

Axles
Capacity
Front – 22.7 litres (24 quarts)
Rear – 24.6 litres (26 quarts)
Type of Lubricant – SAE 80W140

Brake System
Type of Fluid (Same as Hydraulic System) – MS-1209 Hy-Tran Ultra

Conversion
Imperial quart= litres x 0.879877
Imperial gallons= litres x 0.219969

For more Case 621D wheel loader specifications, service information and wiring diagrams, we highly recommend the following manuals:

Posted on by — Leave a comment

Case 821B Loader Serial Number Location, Fluid Capacities

Serial Number / PIN location

Fluid Capacities

Oil Capacity (with Filter Change) – 22 U.S. Quarts (20.9 L)
Oil Level Check – Every 10 Hours of Operation or One Time Each Day
Oil Change and Filter Replacement Interval – Every 250 Hours of Operation

Cooling System Capacity – 34 U.S. Quarts (32.2 L)
Coolant Reservoir Fluid Level Check Interval – Every 10 Hours of Operation
Radiator Fluid Level Check Interval – Every 250 Hours of Operation
Cooling System Change Interval – Every 2000 Hours of Operation or One Time Each Year
Cooling System Filter Replacement Interval – Every 250 Hours of Operation and Each Time the Cooling System is Drained, Flushed and/or Refilled

Fuel Tank Capacity – 72 U.S. Gallons (272.7 L)

Hydraulic Reservoir Refill Capacity – 40 U.S. Gallons (150.2 L)
Total System Capacity – 46.0 U.S. Gallons (174.2 L)

Transmission Refill Capacity (with Filter Change) – 3.25 U.S. Gallons (12.3 L)

Front and Rear Axle Refill Capacity
Center Bowl Front – 20 U.S. Quarts (18.9 L)
Limited Slip Additive (Front Bowl) – 2.0 U.S. Quarts (1.9 L )
Center Bowl Rear – 14.5 U.S. Quarts (13.7 L)
Limited Slip Additive (Rear Bowl) – 1.5 U.S. Quart (1.4 L)
Front Planetary Ends (Each) – 6.5 U.S. Quarts (6.2 L)
Rear Planetary Ends (Each) – 6 U.S. Quarts (5.7 L)

For more Case 821B wheel loader specifications, service information and wiring diagrams, we highly recommend the following manuals:

Posted on by — Leave a comment

New Holland L865, LX865, LX885, LX985 Skid Steer Specs and Serial Number Location

New Holland L865, LX865, LX885, LX985 Skid Steer

Basic Specifications:

MODEL L865, Lx865, Lx885
ENGINE MODEL 332T Non-emissionized
L865 – 850651 to 999999 and 0001 to 931119
Lx865 – 850652 to 999999 and 0001 to 99422
Lx885 – 864901 to 999999 and 0001 to 113970
MODEL 332T/JF Emissionized
L865 – 93120 to 850650
Lx865 – 99423 to 850651
Lx885 – 113971 to 864900
CYLINDERS 3
ASPIRATION TURBOCHARGED
CYCLE 4 Stroke
BORE AND STROKE 4.4″ X 4.2″(112×106.7)
DISPLACEMENT 192 cu.in. (3.15L)
COMPRESSION RATIO 17.5 to 1
SPEEDS
-FAST (no load) 2225 to 2275 RPM
-IDLE (no load) 1000 to 1050 RPM
HORSEPOWER
(GROSS)MFG rating 67 @2200 RPM
SAE NET) 60 @ 2100 RPM
TORQUE (Mfg, rating) Gross 184.5 ft. lbs. (250 N·m) @ 1400RPM
CAPACITIES
Cooling system 16 qt.(15.1L)
Engine crankcase w/filter 7 qt. (6.6L)
Fuel tank 18.8 Gal. (71.2 L)
Hydraulic system 6.5 Gal.(25.5L)
Engine gearbox 1.5 qt. (1.4L)
Final drive gearbox (ea.) 3.8 qt. (3.6L)
Chain case (final drive ea.) 2 Gal. (7.6L)
Common gearbox and final drive chain case (ea.) 11.8 qt. (11.2L)

MODEL Lx985
ENGINE MODEL 450/NC Emissionized
CYLINDERS 4
ASPIRATION NATURAL
CYCLE 4 Stroke
BORE AND STROKE 4.4″ X 5.0″ (112×127)
DISPLACEMENT 304 cu.in. (SL)
COMPRESSION RATIO 17.5to1
SPEEDS
-FAST (no load) 2325 to 2375 RPM
-IDLE (no load) 1000 to 1050 RPM
HORSEPOWER
(GROSS)MFG rating 83 @ 2200 RPM
(SAE NET) 75 @ 2200 RPM
TORQUE (Mfg, rating) Gross 245 ft. lbs. (332 N·m) @1300 RPM
CAPACITIES
Cooling system 16 qt.(15.1 L)
Engine crankcase w/filter 3.6 gal. (13.6 L)
Fuel tank 18.8 gal.(71.2 L)
Hydraulic system 10.25 gal.(38.8 L)
Engine gearbox 1.5 qt. (1.4 L)
Common gearbox and final drive chain case (ea.) 12 qt. (11.2 L)

Serial number location:

For comprehensive service and maintenance information, we highly recommend the following manuals: